To receive the weekly EBS newsletter
      Home            News          Advertising       Events         About us      Archive Issues     In-House Test Centres   
News
July - 2016
Week 4
1

Feeding system for WPC compounding plant in China25.07.2016

SIMAR GmbH has delivered the complete materials handling for a new wood plastic compound (WPC) compounding plant in China with the bulk bag discharging and feeding of raw materials such as wood flours, polymer resin, regrinds and talc tailored to meet requirements.
2

Vortex appoints new Middle East agent25.07.2016

Vortex Global has announced the appointment of Smart Systems for Factories Operation & Maintenance Co. as its agent in Algeria, Bahrain, Egypt, Jordan, Lebanon, Libya, Morocco, Saudi Arabia, Sudan, Tunisia, Qatar and Yemen.
3

Accurate level measurement of ultra-low-density powder25.07.2016

Pulsar Process Measurement has supplied a non-contacting ultrasonic measurement system to the Barry, South Wales, plant of Cabot Carbon to provide accurate monitoring of levels of fumed silica in an 11m high silo.
4

From Ecobulk to Recobulk25.07.2016

Schütz with its Ecobulk created the most frequently used worldwide IBC system.
5

Continuous weighing controllers for belt scales25.07.2016

Scaime has introduced the eNod4-B, a weighing controller dedicated to continuous weighing and dosing appications.
Week 3
1

Key marketing appointment at Fike18.07.2016

Fike has promoted David Kemp to executive vice president of global sales and marketing.
2

Drying in minutes rather than hours18.07.2016

Kreyenborg Plant Technology will feature a variety of innovations at K-2016 which takes place 19-26 October in Düsseldorf.
3

Turkish cement plant equipped and supervised by single supplier18.07.2016

Beumer recently won an order to supply 13 bucket elevators for the transport of cement, clinker and raw meal, as well as six apron conveyors and 13 silo discharge systems for clinker transport for a new 5000t/day capacity greenfield cement plant to be operated by Sycs Insaar Cimento Madencilik in Elazig, eastern Turkey.
4

Caperva to represent Farleygreene in Iberian peninsula18.07.2016

Farleygreene has appointed Caperva as its representative in Spain and Portugal as part of an initiative to expand its European sales network.
5

Bagged cement: plastic packaging in the ascendancy18.07.2016

Haver & Boecker in June completed the installation of a ROTO-PACKER® ADAMS® 10 at the Dagenham depot near London of UK cement manufacturer Hope Construction Materials which has implemented polyethylene (PE) packaging at the site.
Week 2
1

New CEO at Robson11.07.2016

Geo Robson & Co. has named Jeff Hudson as chief executive officer.
2

Screw conveyor reliability guaranteed by service contract11.07.2016

Van Beek reports that it is vital that the sludge drying plant operated by Hollands Noorderkwartier District Water Board (HHNK) should not be shut down for a lengthy period.
3

Freeman becomes global distributor for Lenterra inline powder flow sensors11.07.2016

Freeman Technology has entered into an exclusive distribution agreement with Lenterra.
4

High-performance mixer aspiration ensures constant process conditions11.07.2016

MTI Mischtechnik has launched Vent tec® 2.0, a new generation of its proven high-performance aspiration systems for heating/cooling mixer combinations.
5

Combined bagging and bulk bag filling system11.07.2016

Concetti recently supplied a South American manufacturer of animal feeds with a turnkey installation combining an IGF600 fully automatic bagging system designed for woven PP open mouth bags with a bulk bag filling station.
Week 1
1

Screw conveyors built to last04.07.2016

Van Beek reports that Veolia Polymers in Vroomshoop has been subjecting its screw conveyors to the ultimate durability test for over two decades.
2

Easy removal of stretch hood film from palletised loads04.07.2016

Beumer Group highlighted various innovations to its stretch hooding technology at this year’s CeMAT, which took place earlier this summer in Hanover.
3

New Bühler CEO04.07.2016

Bühler has appointed Stefan Scheiber, 50, as chief executive officer.
4

Record order for plate magnets04.07.2016

Bunting Magnetics Europe has won its largest single export contract to manufacture and supply 63 high strength, rare earth plate magnets, which will be installed in a tobacco manufacturing operation in Indonesia.
5

Particle analyzer offers higher resolution and extended measuring range04.07.2016

Retsch Technology has introduced the CAMSIZER X2, the next generation of its CAMSIZER XT dynamic image analysis system.
June - 2016
Week 4
1

Fast filling of bulk containers27.06.2016

Van Beek has developed a screw conveyor system which is capable of filling a lined 20ft freight container up to 85% full in less than 30 minutes.
2

Conveyor chain tool speeds maintenance/repair27.06.2016

VAV Aandrijvingen has developed the CirclipMaster, a tool designed for use with conveyor chains.
3

UK powder processing equipment specialist seeks increased export business27.06.2016

British Rema is looking to expand its representation base outside the UK to coincide with the launch of an innovative new range of mixing and blending equipment.
4

Today’s solutions provided by tomorrow’s technology27.06.2016

Bühler states that at its forthcoming networking days which take place 22-24 August will showcase its current and future technical developments which embrace the so-called Internet of Things.
5

New CFO at Schenck Process27.06.2016

Schenck Process reports that Eric Jaschke has been confirmed as chief financial officer with effect from beginning of June.
Week 3
1

Plastic granules: vertical storage frees up warehouse space20.06.2016

Barton Fabrications has delivered two 50t capacity aluminium silos to the Skelmersdale site of Sanko Gosei Automotive Systems.
2

Batch controller provides printed receipts20.06.2016

Fluidwell has launched the N413 batch controller with receipt printing functionality.
3

Recycling post-consumer film waste20.06.2016

Herbold Meckesheim has supplied an advanced plastic film recycling installation to Rodepa Plastics of the Netherlands.
4

On-line moisture measurement of biofuels20.06.2016

The Maldon reports the introduction of its PrediktIR gauge which has been designed for on-line moisture measurement of wood-sourced biofuel products such as woodchips, pellets and sawdust.
5

Fully automatic packaging lines for SABIC in Italy20.06.2016

Coperion has supplied six packaging lines plus a common palletising island to the Pontirolo, Italy, plant of SABIC.
Week 2
1

Nerak Wiese key staff appointment13.06.2016

Nerak Wiese representative and licensee for Nerak Fördertechnik of Germany, has recruited Simon Barrett as head of projects.
2

Grain processing summit13.06.2016

Bühler has invited several hundred CEOs and opinion formers in the grain-processing industry to attend its Networking Days, 22-24 August.
3

Extended family of rheometers13.06.2016

Anton Paar Ltd states that the MCR series of rheometers have opened more doors and created more testing possibilities than any other rheometer in the world.
4

Accurate dosing of powders13.06.2016

AZO has introduced latest versions of the AZODOS® family of dosing units for precise feeding of powdered products.
5

Vortex (UK) relocates within Darlington13.06.2016

Vortex in April moved its European headquarters to a newly renovated industrial building near Darlington town centre.
Week 1
1

Variable-speed rotor mill wins two awards06.06.2016

Fritsch reports that its recently launched PULVERISETTE 14 Premium Line variable-speed rotor mill won the best products competition at this year’s EuroLab, the international Polish trade fair for analytical, measurement and control technology.
2

Magnetic separator for printed circuit boards06.06.2016

Bunting Magnetics Europe has developed a system that separates and recovers printed circuit boards (PCBs).
3

Bluetooth opens up new level gauging opportunities06.06.2016

VEGA Grieshaber, specialising in manufacture of level and pressure instrumentation, is believed to be the first sensor manufacturer to employ Bluetooth technology.
4

Contactless measurement of bulk material throughputs06.06.2016

DYNA Instruments has introduced the DYNAmas which can be implemented for the online mass flow rate measurement of bulk materials of all kinds.
5

Powder tester engenders widespread interest06.06.2016

Freeman Technology, at Powtech received positive feedback for its new Uniaxial Powder Tester which was introduced at the beginning of the year.
May - 2016
Week 4
1

Upgraded FFS packaging machine30.05.2016

Coperion has launched a newly designed version of its ITL 250 FFS (form-fill-seal) packaging machine.
2

Constant transfer of material delivered by wheeled loader30.05.2016

Flexicon Europe has introduced an extreme-duty Flexicon® flexible screw conveyor with purpose-built hopper which has been designed to transfer bulk material received from front end loaders.
3

Easy-to-clean bulk bag connection system30.05.2016

AZO has also upgraded its tried and tested bulk bag connection system.
4

Dry cleaning the insides of IBCs30.05.2016

AZO has introduced an ingenious system for internal dry cleaning of IBCs (intermediate bulk containers) which have become contaminated with product residue and dust.
5

Magnetic separator for stainless steel30.05.2016

Eriez Magnetics Europe has unveiled the revolutionary RE Roll Separator which has been designed to recover stainless steel effectively.
Week 3
1

ATEX-approved vacuum conveyors: making the right choice online23.05.2016

Piab has extended its pneumatic conveyor product line to include ATEX gas approved piFLOW®p and piFLOW®t models.
2

Chemical powders de-lumped with bulk bag conditioner23.05.2016

Flexicon Europe recently supplied a Block-Buster® bulk bag conditioner to Barcelona-based DSM Coating Resins Spain, the world's largest producer of polyester resins and one of the largest producers of speciality emulsions.
3

Magnetic separator for high-volume applications23.05.2016

Eclipse Magnetics has extended its Auto-Shuttle magnetic separator range to ensure increased efficiency for high-volume applications.
4

Versatile four-column palletizer23.05.2016

The latest innovation from Concetti (see above) is the PS-3A four-column robot palletizer.
5

Pet food packaging: handling a wide range of bag sizes23.05.2016

Concetti points out that the European dry pet food market is a sophisticated and highly competitive one, with a wide and constantly expanding range of packaging formats, especially at plants supplying own-label products to other brand owners.
Week 2
1

Single-source expertise for the global cement industry16.05.2016

Beumer Group in recent years has been successfully operating its Center of Competence for the cement industry in order to provide optimal systems and installations, becoming a full-range supplier to customers all around the world.
2

Silo filters now available in stainless steel09.05.2016

Infastaub reports that its INFA-JETRON AJP 224 silo filters are now available in a new design with all parts which are in contact with the product – and also the clean gas side – manufactured in stainless steel.
3

Protecting sensitive materials from moisture absorption09.05.2016

motan holding has developed an easily operated system designed to protect sensitive materials from moisture absorption and contamination.
4

Reliable feeding of problematic materials09.05.2016

Gericke points out that precise metering with high levels of repeatability can prove very challenging with bulk products which have a tendency to flush, bridge or compact such as icing sugar, calcium hydroxide, fibres or flakes.
5

Compounding plant successfully commissioned in South Korea09.05.2016

Coperion has during the past decade delivered, installed and launched several compounding plants for BASF to manufacture engineering plastics.
6

IPEG acquires Pelletron09.05.2016

Pelletron Corp. has been acquired by IPEG, Inc.
7

Clean pallets for producer of table salt16.05.2016

Industrial Washing Machines (IWM) recently supplied a pallet washing system for use by Swiss company Schweizer Rheinsalinen.
8

Combined bag dump station and tubular cable conveyor16.05.2016

Flexicon Europe has introduced a manual dump station with integral FLEXI-DISC™ tubular cable conveyor.
9

Sophisticated bakery ingredient handling with innovative IBC system16.05.2016

Ing. Johann Daxner recently designed and delivered a flexible, automated blending and dosing system for production of various ready-made bakery formulations comprising a large number of different ingredients.
10

Enhanced design of dust filter16.05.2016

Infastaub has launched a redesigned version of its INFA-Lamellen-Jet AJL pleated element dust filters for separation of dry, non-sticky dusts.
Week 1
1

Latest vibratory shakers facilitate sieve analysis02.05.2016

Retsch has introduced a new generation of vibratory sieve shakers.
2

Food-grade vibratory conveyor has monobeam construction02.05.2016

Key Technology has introduced the re-engineered Iso-Flo® range of vibratory conveyors with an innovative frame comprising a single structural member.
3

J-Tec builds US compounding installation for Asahi Kasei Plastics02.05.2016

J-Tec Material Handling, in September 2014 signed a contract with Asahi Kasei Plastics North America to build a $30 million installation for advanced thermoplastic compounds in Limestone County, Athens, AL.
4

Gericke capitalises on Industry 4.002.05.2016

Gericke anticipates that the fourth Industrial Revolution (Industry 4.0) will significantly benefit its customers.
5

World’s tallest bucket elevator02.05.2016

Beumer Group has won a repeat turnkey order to supply a high-performance belt bucket elevator to Indian cement manufacturer ACC Ltd.
April - 2016
Week 4
1

Rotary feeders with fast-clean capability25.04.2016

Zeppelin Systems has decided to optimise its recently launched range of CFH and CFM rotary feeders to meet requirements for rapid cleaning between batch changes.
2

New CEO at Apollo Group25.04.2016

Apollo, has reported the appointment of Claudia van den Pol, 29, as group CEO.
3

Rotational moulding application for dense phase conveying25.04.2016

Fluid Airsystems will be exhibiting its patented EASYLOAD dense phase pneumatic conveying system at a one-day health and safety seminar being organised 19 May by the British Plastics Federation in Northampton, UK.
4

Mixer in a container25.04.2016

Gebr. Lödige Maschinenbau, will be unveiling a special version of its FKM 600 ploughshare mixer at IFAT, the world’s foremost trade fair for environmental technologies which takes place 30 May – 3 June in Munich.
5

Hygienic reverse-jet dust filter25.04.2016

Tetra Pak has launched the FL200 dust filter which has been specifically designed for high-hygiene applications involving, for example, powders for baby food, nutritional and dietary products and supplements.
Week 3
1

Double bulk bag filling installation for cattle feed18.04.2016

TBMA Europe has completed a twin bulk-bag filling rig for a manufacturer of high-quality cattle feed.
2

Low-profile bulk bag discharger18.04.2016

Flexicon Europe has introduced a new series of BULK-OUT® half-frame bulk bag dischargers featuring low-cost frames of variable heights and offsets to fit restricted areas which may previously have been utilised for emptying smaller containers such as sacks, pails, drums, boxes and bins.
3

Major expansion at KSE18.04.2016

KSE Process Technology reports that in February it began the first construction phase of a series of new buildings.
4

Dedicated silo safety and protection website18.04.2016

Hycontrol has launched www.siloprotection.com, a new website designed specifically to provide guidance to prevent over-pressurisation of storage silos during delivery of powdered products.
5

Load cell junction box with automatic fault detection18.04.2016

Penko Engineering has developed the SIGMA4 ‘intelligent’ load cell cable junction box which has been designed to ascertain if load cells are functioning properly.
Week 2
1

Screw feeding and mixing11.04.2016

Ajax Equipment will be exhibiting its latest bulk handling developments in including bidirectional screw feeders, lump breakers and hoppers on Stand 3A-479 at Powtech.
2

Hygienic rotary valve11.04.2016

Coperion will be unveiling several innovations on Stand 4-290 at Powtech.
3

Versatile high-speed mixers11.04.2016

MTI Mischtechnik will be showing vertical high-speed mixers from its Flex®-line series at Powtech on Stand 1-154.
4

Facial recognition replaces passwords11.04.2016

AZO will for the first time be demonstrating machine operator identification using biometric facial recognition on Stand 1-356 at next week’s Powtech.
5

Weigh modules continuously monitor load cell performance.11.04.2016

Mettler Toledo will be giving pride of place at Powtech to its SWB605 PowerMount™ weigh modules on Stand 1-529.
Week 1
1

High-performance shredder plays key role in reprocessing of polyolefin fabrics04.04.2016

Lindner reSource GmbH has delivered a Micromat Plus 2000 shredder to Belgian plastics recycler Tivaco, which specialises in converting clean post-industrial scrap into high-grade pellets for demanding applications.
2

Centrifugal sifter achieves rates up to 100t/h04.04.2016

Kason Kek-Gardner has extended its range of centrifugal sifters with the introduction of the Model K1350C which is designed to remove oversize foreign matter and agglomerates from on-size material at rates up to 100t/h on a continuous basis.
3

High-capacity Z-conveyor offers safety advantages combined with major cost savings04.04.2016

Poeth Solids Processing has recently developed an innovative and cost-effective Z-Conveyor for high-capacity transport of bulk solids to great heights.
4

Hoerbiger further extends explosion protection portfolio with Brilex acquisition04.04.2016

Hoerbiger Group, on 1st April acquired privately held Brilex Gesellschaft für Explosionsschutz mbH, based in Brilon, Germany.
5

Bulk truck loaders get smart with Industry 4.0 makeover04.04.2016

Van Beek has introduced the Dino Wireless Monitoring System which can be incorporated to its range of Dino bulk truck loaders as well as being retrofitted to existing machines.
March - 2016
Week 4
1

Sack closure by welding instead of sewing28.03.2016

Starlinger has introduced the IC*STAR sack concept which has been developed in association with Gleisdorf-based STATEC BINDER.
2

Materials handling contract for Saudi cement plant28.03.2016

Aumund Fördertechnik reports that it has received an order for delivery of a substantial package of machines for the grinding plant at a new brown-field cement mill currently being constructed for Arabian Cement Co. in Rabigh, Saudi Arabia.
3

Radiometric density measurement device28.03.2016

Berthold Technologies has introduced the DuoSeries LB 474, a new radiometric density system based on real 2-wire technology.
4

Cylindrical dust collector filters28.03.2016

MIX Srl has developed a new range of round dust collector filters.
5

Mixing solids with problematic liquids at a controlled temperature28.03.2016

Celsius has developed the Celsimix for certain applications in the food and chemical industry which are beyond the capabilities of standard mixers.
Week 3
1

Particle size measurement and analysis21.03.2016

Xoptix will be launching its new IntelliSizer™ in-process particle sizer on Stand 1-129 at POWTECH.
2

New test plant for Promixon21.03.2016

Promixon has just opened a new in-house test plant to allow customers to carry out trials on various products with its wide range of mixing equipment.
3

Rheinkalk installs pulverised lignite silo21.03.2016

In order to secure the fuel supply for the rotary kilns used for the production of quicklime in its Flandersbach plant, Rheinkalk GmbH in March 2015 placed an order with Silobau Thorwesten for the construction of a new silo installation.
4

Dust-tight mobile drum tipper21.03.2016

Flexicon Europe has introduced a TIP-TITE® mobile drum tipper which allows dustfree transfer of bulk materials from drums into process equipment and storage vessels.
5

Flexible and rugged fertiliser bagging line in the Netherlands21.03.2016

Vlaeynatie BV is about to open a new fertiliser terminal near Terneuzen, the Netherlands.
Week 2
1

Understanding the implications of ATEX/DSEAR regulations14.03.2016

The Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich, UK, is running its popular one-day course ‘Dust explosions: how to demonstrate DSEAR/ATEX compliance’ on 6 April 2016 at its premises in Chatham, Kent.
2

High-performance grinding into the nano range14.03.2016

Fritsch will be launching various new items of laboratory-scale milling and sizing equipment at POWTECH on Stand 2-218.
3

Transmitter for high-speed automated weighing processes14.03.2016

Mettler Toledo has introduced a compact weighing transmitter which has been designed to save space inside the control cabinet.
4

Vertical conveying: screw conveyors outperform pocket-belt systems14.03.2016

Van Beek reports that Dutch recycling specialist ARN has been successfully processing shredder waste from end-of-life vehicles in a new factory in Tiel since 2011.
5

Sanitary cone mill for problematic materials14.03.2016

Kason Kek-Gardner has launched the Model CM540 sanitary cone mill which has been designed to deliver gentle, low-energy size reduction while achieving even particle distribution with minimal fines.
Week 1
1

High-speed bagging of animal feed and pet food07.03.2016

Concetti states that bag filling has been taken to a new level with the Starpack® range of bagging machines.
2

Europe and North America: different ways of doing business07.03.2016

J-Tec Material Handling which last year opened its North American headquarters in Houston, TX at the end of last year won its first US contract.
3

Rotor impact mills in Thailand07.03.2016

BHS-Sonthofen reports that its Type RPM rotor impact mills are becoming increasingly popular for production of sand used in dry mortar.
4

New MD at Matcon07.03.2016

Matcon has named Stephen Ball as managing director, taking over from Dave Cooper who had been appointed to the position of MD in October 2014.
5

Screening of milk powder07.03.2016

GKM Siebtechnik will feature its newly developed Vibrating-Control-Screener KTS-VS 2 on Stand 4A-331 at POWTECH along with various other innovative screening machines.
February - 2016
Week 4
1

Mixer offers fast discharge29.02.2016

Gebr. Lödige Maschinenbau has introduced the Type SEM 3000 quick-emptying mixer which is equipped with an extra large discharge outlet along the entire length of the drum, allowing the mixed product to be emptied in a matter of seconds.
2

Remote maintenance for handling and processing equipment29.02.2016

Motan-colortronic is offering a new remote maintenance system which is capable of monitoring all material handling components employed during plastics processing.
3

UK silos exported overland to Slovakia29.02.2016

Barton Fabrications has exported two silos to the Slovakian site of specialist plastic extrusion and moulding company, COBA Automotive s.r.o.
4

Weather-proof packaging for powders29.02.2016

RKW Group has introduced RKW ProVent® Advanced – the latest generation of its ProVent range of self-venting plastic packaging which is designed to provide reliable product protection for powdery goods such as cement and other building materials.
5

Dust collector filter reduces risk of dust explosions29.02.2016

Camfil Air Pollution Control (APC) recently launched the HemiPleat® FR Carbon, the first dust collector filter to combine flame-retardant and conductive properties in a single filter that also offers high efficiency, long service life, and energy-efficient performance.
Week 3
1

Congress on industrial explosion protection22.02.2016

The Intercontinental Association of Experts for Industrial Explosion Protection (IND EX®), will be organising the 4th IND EX Safety Congress 20 April in Nuremberg alongside the Powtech exhibition.
2

Modification ensures uniform hopper outflow22.02.2016

Ajax Equipment has improved hopper flow at a Scandinavian food manufacturer which processes puffed oats and rice.
3

New version of Pegasus mixer on show22.02.2016

Dinnissen reports that its well known Pegasus® mixer is constantly undergoing improvements and modifications to optimise mixing results and to broaden the available range of applications.
4

Lödige now has direct US representation22.02.2016

At the beginning of this year Gebr. Lödige Maschinenbau opened a subsidiary in Florence, KY, to provide local service for the needs of North American customers.
5

Jesma opens Benelux office22.02.2016

Jesma Vejeteknik A/S at the beginning of February opened an office in the Netherlands.
Week 2
1

Versatile laboratory-scale blender15.02.2016

British Rema Process Equipment has launched an interchangeable blender.
2

Bulk bag discharger with hopper shuttle system15.02.2016

Flexicon Europe has introduced a specially adapted BULK-OUT® bulk bag discharge station which has been designed to prevent cross-contamination during material changeovers, while eliminating down-time associated with cleaning of hoppers.
3

GEA adopts integrated approach to UK food sector15.02.2016

GEA UK is now offering all group services from a single address with just one point of contact.
4

Pressure compensation for high-accuracy feeders15.02.2016

Coperion K-Tron has introduced an electronic pressure compensation (EPC) system – believed to be unique – for its loss-in-weight feeders.
5

Dec appoints new Benelux representative15.02.2016

Dec Group has named Emdaco based in Waasmunster, Belgium, as its agent for the Benelux region.
Week 1
1

Screw feeders are central to pyrolysis project01.02.2016

Ajax Equipment is supplying hydrocarbon reclamation firm Recycling Technologies with handling equipment for the company’s waste-to-resource pyrolysis system.
2

Mixing Day 2016 in April01.02.2016

Delft Solids Solutions is organising a one-day seminar and workshop on mixing powders, with special emphasis on measuring and preventing segregation of powder mixtures.
3

Compressed air filters tested for indirect food contact01.02.2016

Donaldson Filtration Deutschland reports that it is now able to ensure greater safety in the application of compressed air used in the food and beverage industry.
4

Upgraded test plant with special emphasis on pneumatic conveying01.02.2016

Dinnissen Process Technology in the second half of 2015 further expanded its D-Innocenter in-house test plant.
5

Upgraded vibratory sieving technology08.02.2016

Farleygreene has recently launched the SIEVGEN 400-US ultrasonic sieve which is designed for separation of very fine powders such as toner and ceramics, as well as heavy metal powders used in the production of additives.
6

Screw blowers offer significant energy savings08.02.2016

Kaeser Kompressoren has recently introduced a series of innovative screw blowers capable of delivering exceptional energy cost savings of up to 35% compared to conventional reciprocating blowers.
7

Improved level measurement technology for solids08.02.2016

Emerson Process Management has enhanced its range of level measurement devices for bulk solids and powders.
8

Fully automatic truck loading of bags08.02.2016

Haver & Boecker has recently introduced the HAVER SpeedRoad, a compact, fully automatic system for loading filled bags directly on to trucks.
9

New range of centrifugal sifters08.02.2016

Gericke has introduced a completely new range of centrifugal sifters with enhanced design and operational features necessary to satisfy the demands of today’s processing industries.
10

Safe storage of combustible liquids in IBCs01.02.2016

Mauser Group has received certification of its SM13 EX UL IBC design from UL.
  
1 2 3 4 5 6 7 8 9 10