| September - 2015 |
| Week 4 |
|
|
| 2 |
|
SOLIDS Krakow next week28.09.2015 The seventh edition of SOLIDS Krakow (SyMas) takes place on Tuesday and Wednesday 6-7 October and has grown to become Poland’s premium event for bulk solids technology.
|
|
|
|
|
|
|
|
| Week 3 |
|
|
|
|
|
|
|
|
| 5 |
|
Kason acquires Kek-Gardner21.09.2015 Kason Corp. has purchased Kek-Gardner Ltd, the UK-based manufacturer of sifting, mixing and size reduction equipment.
|
|
| Week 2 |
|
|
| 2 |
|
New CFO at Schenck Process.14.09.2015 Schenck Process reports that with effect from beginning of August Dr OthmarBelker has become chief financial officer and a member of the management board of the Schenck Process Group.
|
|
|
|
|
|
| 5 |
|
Easy-clean screw sampler14.09.2015 Van Beek has developed a screw-type sampler which is particularly suitable for taking representative product samples from containers and hoppers as well as in-line.
|
|
| Week 1 |
|
|
|
|
|
|
|
|
|
|
| August - 2015 |
| Week 4 |
| 1 |
|
IEP Technologies acquired by Hoerbiger31.08.2015 With effect from 1 September Hoerbiger Group headquartered in Zug, Switzerland, has purchased the internationally respected explosion protection specialist IEP Technologies, based in Marlborough, Massachusetts, USA, from Sentinel Capital Partners.
|
|
|
|
|
|
|
|
|
|
| 6 |
|
Remote diagnosis via PC tablet24.08.2015 Haver & Boecker has expanded its remote service to customers with the introduction of the HAVER Service Pad.
|
|
|
|
| 8 |
|
Debus named EVP at Camfil APC31.08.2015 Camfil Air Pollution Control (APC) has appointed Christian Debus as its new executive vice president in charge of worldwide operations.
|
|
| 9 |
|
Baby formula mixing31.08.2015 Industrial mixer manufacturer amixon® has developed a single-shaft mixing system with comparatively small dimensions which is well suited for precision processing of baby food and other dietetic foodstuffs.
|
|
|
|
| Week 3 |
|
|
|
|
|
|
|
|
| 5 |
|
Automatic bag emptier for extreme conditions17.08.2015 Dinnissen Process Technology has developed an extra robust version of its established Dima 200 bag emptier that has been designed to function effectively even under the most difficult conditions.
|
|
| Week 2 |
|
|
|
|
| 3 |
|
Radiometric level measurement10.08.2015 Berthold Technologies has introduced the DuoSeries LB 470 radiometric level system based on real 2 wire technology.
|
|
|
|
|
|
| Week 1 |
| 1 |
|
Spiroflow twice honoured03.08.2015 Spiroflow is celebrating a double achievement after winning two ‘company of the year’ awards in a matter of months.
|
|
| 2 |
|
Flame arrester fits curved vessels03.08.2015 STIF has launched an ATEX, EC certified flame arrester which has been designed to fit the curvature of cylindrical and round vessels.
|
|
|
|
| 4 |
|
Vortex teams with DMN in Russia03.08.2015 Vortex Global has entered into a strategic sales and promotional partnership in the Russian market with DMN Vostok LLC.
|
|
| 5 |
|
Extended range of explosion vents03.08.2015 Fike has added two new types of vents to its explosion vent product lines: the round Sani-VA sanitary vent and the CV-S High Vacuum vent.
|
|
| Juli - 2015 |
| Week 4 |
| 1 |
|
Flexicon opens Barcelona office27.07.2015 Flexicon has established a branch office in Barcelona to provide engineering services and technical sales support to customers throughout Spain.
|
|
|
|
|
|
| 4 |
|
Web-based dust collection diagnostics27.07.2015 Camfil Air Pollution Control (APC) has introduced what is believed to be the first web-based technology for fast, accurate and comprehensive dust collection diagnostics.
|
|
|
|
| Week 3 |
| 1 |
|
Stretch-hooder gains positive user feedback20.07.2015 Beumer reports that its ‘stretch hood A’ machine which was launched 14 months ago at the 2014 interpack exhibition has been well received across a wide range of industries including cement, construction and chemicals.
|
|
|
|
| 3 |
|
Jaw crusher and disk mill receive industry prizes20.07.2015 Fritsch Milling and Sizing reports that its PULVERISETTE 1 ‘premium line’ jaw crusher and its PULVERISETTE 13 ‘premium line’ disk mill have won the INDUSTRIEPREIS 2015 awarded by the Huber publishing house.
|
|
|
|
| 5 |
|
New president of De Dietrich Group20.07.2015 Chemical equipment specialist De Dietrich Process Systems in early July announced the appointment of Remco de Jong, 52, as president of De Dietrich Group.
|
|
| Week 2 |
|
|
|
|
| 3 |
|
Bulk bag conditioner13.07.2015 Flexicon Europe has introduced a patented BLOCK-BUSTER® hydraulic bulk bag conditioner that can accommodate FIBCs ranging from short to extra tall designs.
|
|
| 4 |
|
Enhanced manufacture of industrial vibrators13.07.2015 Martin Engineering has announced the design of a new manufacturing process to build its industrial vibrators, bringing a higher level of quality and consistency through a classic lean manufacturing operation.
|
|
| 5 |
|
FFS bagging of wood pellets13.07.2015 Concetti is now able to offer form-fill-seal (FFS-E) bagging machines for packaging of wood pellets.
|
|
| Week 1 |
|
|
|
|
| 3 |
|
Fine-cutting mill has rotating classifying feature06.07.2015 NETZSCH Trockenmahltechnik has gained patented protection for the recently launched SECOMY® S Version of its range of SECOMY cutting mills which are designed to ensure a high rate of cuts for ultrafine grinding of cuttable materials.
|
|
| 4 |
|
Vortex appoints agency in Nigeria06.07.2015 Vortex Valves has announced the appointment of Teelad Investments Ltd as its exclusive agent in Nigeria, Ghana, Sierra Leone, Ivory Coast and the Benin Republic.
|
|
|
|
| Juni - 2015 |
| Week 4 |
|
|
|
|
|
|
|
|
|
|
| Week 3 |
|
|
| 2 |
|
Drum coater sets new standards22.06.2015 Glatt chose the occasion of last week’s ACHEMA to launch the latest version of its GCC drum coater which offers many innovations.
|
|
|
|
|
|
|
|
| Week 2 |
|
|
| 2 |
|
Confronting the challenge of mixing adhesives15.06.2015 Ekato Systems has designed a system specifically suited for the mixing process in production of adhesives which takes the complex rheology into account with respect to the production of many different types of formulations.
|
|
|
|
|
|
|
|
| Week 1 |
| 1 |
|
Metal separation ‘health check’ available at PRE01.06.2015 Bunting Magnetics Europe will be exhibiting a range of magnetic separators and metal detectors on stand E027 at PRE 2015, being held 16-17 June at the International Centre in Telford.
|
|
|
|
| 3 |
|
Faster maintenance for rotary valves01.06.2015 Rota Val has just been granted a European patent on its new Rotalign concept which will now be available on its latest range of Modular Fast Clean rotary valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mai - 2015 |
| Week 4 |
|
|
|
|
|
|
|
|
|
|
| Week 3 |
|
|
| 2 |
|
Tablets dispensed gently from IBCs18.05.2015 Matcon emphasises that not all intermediate bulk containers are the same, and the cone valve technology at the heart of the Matcon IBC system enables the feeding of blended powders and granules directly to roller compactors and tablet compression without the risk of segregation.
|
|
|
|
|
|
|
|
| Week 2 |
| 1 |
|
Novel mixer blade saves energy11.05.2015 Gebr. Lödige Maschinenbau will be presenting a new type of shovel blade for mixing solids in horizontal Ploughshare mixers at Achema (hall 6.0, stand C2).
|
|
|
|
|
|
|
|
|
|
| Week 1 |
|
|
|
|
|
|
|
|
| 5 |
|
New generation of fluid bed dryers04.05.2015 Imtech Ventilex has introduced what it believes to be the next generation of drying technology in the form of its latest range of fluid bed dryers.
|
|
| April - 2015 |
| Week 4 |
|
|
| 2 |
|
Chute magnet for animal feed protection27.04.2015 Goudsmit Magnetic Systems has developed a new type of magnetic separator that can be easily installed in existing free-fall or chute processes as commonly encountered.
|
|
| 3 |
|
Coffee transferred by tubular drag conveyor27.04.2015 Spiroflow recently supplied a Cableflow® cable-driven tubular drag conveyor to a leading British coffee supplier which packs instant, roast and ground coffee for most of the major national supermarkets.
|
|
| 4 |
|
Bunting appointment27.04.2015 Bunting Magnetics Europe has recruited Matthew Swallow as a sales engineer to further develop the company’s business within the magnetic assemblies sector.
|
|
|
|
| Week 3 |
|
|
|
|
| 3 |
|
Pick-up device for vacuum conveying20.04.2015 At the two above-mentioned trade shows Dinnissen will also be featuring a new pneumatic pick-up device designed to provide a constant inflow of powders and granulates in vacuum conveying systems.
|
|
|
|
|
|
| Week 2 |
|
|
|
|
|
|
|
|
|
|
| Week 1 |
|
|
| 2 |
|
Highly versatile oscillating sieve mill06.04.2015 Frewitt points out that its OscilloWitt rotating/oscillating sieve mill has already acquired a favourable reputation for gentle grinding of heat-sensitive products.
|
|
| 3 |
|
Improved line of check sieves06.04.2015 Farleygreene has updated its already successful Sievmaster Slimline series of straight-through check sieves to include new features that have been part of ongoing development by the company.
|
|
| 4 |
|
New series of FFS bagging machines06.04.2015 Haver & Boecker is launching the next generation of its INTEGRA® series of FFS filling machines offering capacities up to 3200 bags/h.
|
|
| 5 |
|
Detecting metal in meat slurries and pastes06.04.2015 Bunting Magnetics Europe has launched the meatLINE™ metal separator to provide processors with a solution to the problem of metal contamination in meat slurries and pastes.
|
|